用于電流測量，和儀器一起使用
● 用于變頻器設備或工業電線
● 用于CT 5A的測量次級電流，選擇9694
● 小巧設計適用于狹窄的測量環境
基本參數
| 類別 | 9660 | 9694 |
|---|---|---|
| 額定輸入電流 | AC 100A | AC 5A |
| 額定輸出電壓 | AC 100mV f.s.（AC 1mV/A） | AC 50mV f.s.（AC 10mV/A） |
| 振幅精度 | ±0.3% rdg. ±0.02% f.s. (45 - 66 Hz, f.s. = 額定初級電流) | ±0.3% rdg. ±0.02% f.s. (45 to 66 Hz, f.s. = 額定次級電流) |
| 相位精度 | ±1° (45 - 5 kHz時)，±1.3° (90 A以上) | ±2° (45 - 5 kHz時) |
| 允許輸入 | 連續130A rms（45-66Hz時） | 連續50A rms（45-66Hz時） |
| 頻率特性 | 40Hz-5kHz：±1 %以下（精度偏差） | |
| 額定對地電壓 | AC 300V rms（絕緣電線） | |
| 線圈直徑 | 直徑15 mm | |
| 體積和重量 | 46mmW×135mmH×21mmD，230g，線長3m | |
| 附件 | 使用說明書×1 | |
Used for current measurement, together with instrument
For inverter equipment or industrial wiring
For measuring secondary current of CT 5A, select 9694
Compact design for narrow measuring environment
The basic parameters
Class 9660, 9694,
Rated input current AC 100A AC 5A
Rated output voltage AC 100mV f.s. (AC 1mV/A) AC 50mV f.s. (AC 10mV/A)
Amplitude accuracy + / - 0.3% RDG. Plus or minus 0.02% f.s. (45-66 Hz, f.s. = the rated primary current) plus or minus 0.3% RDG. Plus or minus 0.02% f.s. (45 to 66 Hz, the rated secondary current f.s. =)
Plus or minus 1 ° phase precision (45-5 kHz), plus or minus 1.3 ° above (90 A) plus or minus 2 ° (45-5 kHz)
Maximum allowable input continuous 130A RMS (45-66hz) continuous 50A RMS (45-66hz)
Frequency characteristic: below 1% (accuracy deviation)
Maximum rated earth voltage AC 300V RMS (insulated wire)
Coil diameter diameter 15 mm
Volume and weight 46mmW 135mmH 21mmD, 230g, wire length 3m
Appendix operating instructions 1
