86403、86413、86423系列扭矩傳感器
尺寸小，可靠，精度高，可旋轉，可承受左右扭矩，可進行靜態和動態測量，傳遞滑環
-
Features
- 量程范圍 從0 ...±1N·m 到 0 ... ±1000 N·m
- 重現性好
- 標準化的輸出信號，方便更換
- 可選配出廠校準證書
- 可用于順時針和逆時針扭矩測量
- 可選配集成角度測量
- 轉速可達3000 rpm
-
Product data
型號T 86403, 86413, 86423 工作方式T 旋轉 量程選擇T 86403
0 … ± 1 Nm
0 … ± 2 Nm
0 … ± 5 Nm
0 … ± 12 Nm
0 … ± 25 Nm
0 … ± 63 Nm
0 … ± 160 Nm
0 … ± 500 Nm
0 … ± 1000 Nm 86413
0 … ± 1 Nm
0 … ± 2 Nm
0 … ± 5 Nm
0 … ± 10 Nm
0 … ± 20 Nm
0 … ± 50 Nm
0 … ± 100 Nm
0 … ± 200 Nm
0 … ± 500 Nm 86423
0 … ± 1 Nm
0 … ± 2 Nm
0 … ± 5 Nm
0 … ± 10 Nm
0 … ± 20 Nm信號輸出T 86403 & 86413
0.5 mV/V
2 mV/V
取決于量程范圍 86423
0.5 mV/V
1 mV/V
2 mV/V
取決于量程范圍第二量程比例T No 機械連接T 86403
Internal and external square acc. to DIN 3121 86413
Keyways on both shaft ends 86423
Hexagon head and socket 1/4'' acc. to DIN 3126保護等級T IP50 使用溫度T -10 ... +60 °C 集成速度測量T 86403 & 86413
可選配 86423
No集成角度測量T 86403 & 86413
可選配 86423
No編碼器增量T 360個脈沖轉 轉速T ≤ 2000 rpm 信號傳輸方式T 滑環傳動系統 具體特征T - 出色的重現性
- 標準化的輸出信號使更換變得容易
- 設計用于順時針和逆時針扭矩
- 轉速可達3000 min-1（短期）
-
Description
Precise, reliable measurements of both static and dynamic torques in either direction can be made with this range of sensors.
This opens a wide range of possible applications to the user. These torque sensors are standard equipment in a wide range of industrial automation, quality control and automotive components industry applications, as well as in laboratories.
Typical applications:
Screwing technology
- Checking and adjusting bolting tools such as torque limiting wrenches, screwdrivers
- Testing bolted connections
Measuring the drag torque of motors and pumps
- Frictional torques of gears, bearings and seals
- Testing torsion springs
- Adjusting equipment in the auto industry
(sunroof, power windows etc.)
Strain gauges are mounted on the torsion shaft of the sensor element, itself made of steel, connected to form a full bridge. The electrical power excitation for the wire strain gauge full bridge and the transmission of the measured signal is provided through a high-quality slip-ring system between the stator and the rotor.
For a clockwise torque, the measurement signal is positive, and it is negative for a counterclockwise torque.
The sensor for the optionally available angle measurement for the square shaft versions is fitted with an additional pulse-generating disk.
With the aid of a second encoder track, displaced by 90°, allows the subsequent evaluation units to perform 4-fold edge evaluation. This allows significantly improved resolution to be achieved. The offset track makes it possible to detect the direction of the rotation.
The characteristic parameters for the sensors are standardized in order to reduce the effort required to check a connected amplifier or to exchange the sensor.
-
Downloads
Data sheet
86403_86413_86423技術參數 英Operation manual 86403_86413_86423使用手冊 英
