快速獲得稱量結果 – 價值永恒
無論是簡單的日常工作，還是復雜的稱量程序，NewClassic MS半微量天平將的性能和提高生產力進行了的結合，這一切都來源于快速的穩定時間以及一貫的可靠結果。來自瑞士的高分辨率稱量技術(HRT)，保證了整個稱量范圍內的始終精確。創新左右手互換開關門(ErgoDoor)使樣品的稱量盡可能簡單和方便。內置日期和時間功能，進行符合GLP/GMP規范的打印輸出，確保您的研究的全面控制和可追溯性。 |
規格 - MS205DU 半微量天平
| Limit values | |
| Maximum capacity | 220 g |
| Maximum capacity, fine range | 82 g |
| Readability | 0.1 mg |
| Readability, fine range | 0.01 mg |
| Repeatability (at nominal load) 1) | 0.08 mg (200 g) |
| Repeatability (at low load) 1) | |
| Linearity deviation | 0.2 mg |
| Sensitivity offset 2) | 0.8 mg (200 g) |
| Typical values | |
| Repeatability (at nominal load) 1) | 0.07 mg (200 g) |
| Repeatability (at low load) 1) | 0.015 mg (20g) |
| Minimum weight (according to USP) | 45 mg |
| Minimum weight (@U=1%, 2 sd) | 3 mg |
| Settling time | 4s / 8s |
| Sensitivity offset 2) | 0.6 mg (200g) |
| Dimensions | |
| Weighing pan dimensions (mm) | ø 80 |
| Balance dimensions LxWxH (mm) | 358x247x331 |
1) Standard deviation (sd)
2) Stability of sensitivity with FACT self-adjustment switched on
